EnviroHorn Drain Filter
VJ Engineering is the Authorized Agent of DARCY Spillcare – UK for the country of Malaysia, Singapore & Brunei.
The EnviroHorn™ Drain Filter is installed within the storm drain to capture sediment and oil preventing contamination of drainage network.
It can be used for any application where the potential to pollute the watercourse as a result of oil or sediment entering the drainage system exists. Particular industries of note are construction, farming, agriculture and manufacturing, but is suitable for all areas prone to polluting of the storm water drainage network.
Installation:
- Remove the drain cover and place the EnviroHorn™ Drain Filter into the drain opening.
- Re-place the drain cover back into place.
- Using an appropriate tool cut the excess orange material to the necessary drain size.
- If the drain has brackets, slits will need to be cut in the relevant location to allow the EnviroHorn™ to remain in place.
The EnviroHorn™ Drain Filter is manufactured from a non-woven geotextile fabric and a nylon monofilament polyester layer that collects silt and absorbs oil whilst allowing water to pass through the material structure and flow into the drain.
Each can hold a capacity of up to 1 litre of oil and retain up to 19kg of sediment.
Uninstallation:
When Drain Protector is either full of sediment or the task is completed, lift drain cover and remove the EnviroHorn™ Drain Filter by using the attached handles and dispose using your company guidelines and procedures.
Maintenance:
Please ensure that monitoring of the Drain Protector is conducted on a regular basis, to ensure the EnviroHorn™ performs to its maximum capabilities
